Radar Pad; Easyview; Community Edits; High Res Bathy - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

Menu item and description

Radar PAD

Enables the collision avoidance interception zone layer for Radar targets.
Only available when the Radar layer is enabled.
Note:
For more information about the collision avoidance feature refer to
p.152 — Predicted areas of danger
This setting is always available and not dependent on the charts in use.

EasyView

Enables and disables the magnification of useful icons and text, making
them easier to read.
This setting is available when using Navionics® charts.

Community edits

Enables and disables the display of crowd-sourced data.
This setting is available when using Navionics® charts.

High res bathy

Enables and disables the display of High Resolution Bathymetry charts,
which provide improved bottom detail, contours and structure.
This setting is available when using C-MAP® charts.
Sports fishing
Allows you to display easy-to-use information pages about fishing
locations including fish type, size, depth, and reef and bottom
composition.
This setting is available when using C-MAP® charts.
Marine protected areas
Allows clear identification of areas where commercial and recreational
fishing is prohibited or restricted.
This setting is available when using C-MAP® charts.
Fishing AOI
Enables and disables the display of Fishing AOIs (Areas Of Interest).
This setting is available when using LightHouse™ and C-MAP® charts.
ActiveCaptain
Enables and disables the display of crowd-sourced data.
This setting is available when using C-MAP® charts.
Depths tab
Menu item and description
Show soundings
Enables and disables the display of depth soundings on the chart. When
set to Manual, depth soundings will be shown from Zero to the maximum
depth you specify.
This setting is not available for Raster charts
Show contours
Enables and disables the display of depth contours on the chart. When
set to Manual, contours will be shown from zero to the maximum depth
you specify.
This setting is available when using LightHouse™, C-MAP® and Navionics®
vector charts.
Shallow contour
Determines the depth at which the Shallow contour is displayed. The
Shallow contour cannot be set to a value greater than the Safe contour or
Deep contour value.
This setting is available when using LightHouse™, legacy LightHouse™ and
S-63 vector charts.
200
Options
• On
• Off
• On
• Off
• On
• Off
• On
• Off
• On
• Off
• On
• Off
• On
• Off
• On
• Off
Options
• None
• Manual
• All
• None
• Manual
• All
Numeric depth value