Menu item and description
Chart appearance
Allows you to change the appearance of the Chart app. The settings
available are dependent on the cartography in use.
Note:
• (1) Available onNavionics® charts
• (2) Available on Navionics® and LightHouse™ charts.
• (3) Available on Navionics®, C-MAP® and LightHouse™ charts.
• (4) This setting is always available and not dependent on the
cartography in use.
• (5) Available on Navionics®, C-MAP®, Legacy LightHouse™and
LightHouse™ charts.
• (6) Available on C-MAP® and LightHouse™ charts.
• (7) Available on Navionics® and C-MAP® charts.
My data appearance
You can change how your User data appears in the Chart app.
This setting is always available and not dependent on the cartography in
use.
Weather settings tab
Menu item and description
Wind symbol
Determines whether Arrows or Barbs are used for Wind direction graphics
in Weather mode.
Marine zone boundaries
Determines whether marine boundaries are shown in Weather mode.
Watchbox alerts
Enables and disables Watchbox alerts.
Watchbox range
Determines the range from your vessel that Watchbox alerts are displayed
Signal strength
Displays the signal strength of a connected weather receiver.
Receiver ESN
Displays the Electronic Serial Number (ESN) of a connected weather
receiver.
Note:
The Weather settings tab is only displayed when the Chart app is set to Weather mode.
Page settings tab
• Data Overlays — Enables configuration of Data overlays, which overlay key information from
connected sensors onto the Chart, Radar, Sonar and Camera apps.
Chart app
Options
• 2D shading (1)
• Aerial overlay (2)
• Aerial overlay
opacity (3)
• Relief shading (1)
• Grid (4)
• Chart text (4)
• Chart boundaries (5)
• Text/symbol size (6)
• Deep water color (7)
• Community edits (1)
• Waypoints names
• Route names
• Track names
• Route width
• Track width
• Vector width
• Vector length
Description
• Arrows
• Barbs
• On
• Off
• On
• Off
• 50nm
• 150nm
• 300nm
• 500nm
Signal strength graph
ESN
205