Table of Contents
Advertisement
6. Enter a Speed and Course for the Intel target.
7. Select Save.
The Intel target will be displayed in the Chart app using a purple target icon.
Intel targets can also be created from the Pop-over options in the Intel targets list: Menu > Targets
> Intel > New intel target.
Accessing target options
Target specific options are available for targets that are currently being tracked. The target options
can be accessed from the target's context menu and from the Pop-over options in the relevant target
list. The options available are dependent on the type of target.
To access a target's context menu:
• Press and hold on the target onscreen, or
• Highlight the target onscreen using the Direction controls and press the OK button.
To access the target list Pop-over menu:
• Select the target in the relevant target list, or
• Highlight the target in the list using the Direction controls and press the OK button.
Intel target options
The following options are available for Intel targets.
• Designate TOI — If your MFD is configured for STEDS you can designate a target as a Target of
Interest (TOI). For details see:
p.214 — Target Of Interest (TOI)
• Cancel Target — Cancels the Intel target and removes it from the system.
• Intercept — Initiates a Target interception . For details see:
p.163 — Target intercept
• Show on chart — Displays the target centered in the Chart app.
Intel target list
The target list identifies the target position, course, speed and the type of intel the target is based
on (i.e.: Visual or Reported.). If the target has been designated as a TOI then the related Link ID
will also be displayed.
The Intel targets list can be accessed from the Targets menu in the Radar app and Chart app: Menu
> Targets > Intel.
Selecting a target from the list highlights the selected target in the LiveView app pane on the right of
the page and opens the Pop-over menu.
212
Advertisement
Table of Contents
Troubleshooting
