Standby (Not Transmitting); Transmitting; Putting The Radar Into Standby; Powering Down Your Radar Scanner - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

Standby (Not transmitting)

If the 'Standby' message is displayed then select Transmit to begin transmitting.

Transmitting

If your Radar scanner is connected, powered up and transmitting then the Radar image is displayed
and echoes/targets are displayed onscreen.

Putting the radar into standby

With your selected radar displayed onscreen:
1. Select Transmit from the main menu.
The radar scanner will stop transmitting and is put into standby mode.

Powering down your radar scanner

With your radar scanner in standby mode:
1. Select the Off icon.
2. Select Yes to confirm power down.
The radar scanner will still consume a small amount of power whilst it is powered off, this is to
ensure the radar can be powered back up quickly.
262