Toi Oneshot Settings - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

• T1 Initial delay — The OneShot TOI icon is used to represent OneShot TOIs until an initial delay
period has expired.
• T2 Second delay — After the initial delay period has expired the TOI will revert to using its original
target icon but maintain the Red dashed rings around the icon. After a second delay period expires
the Red dashed circles are removed and the target reverts to using its original target icon. After
the second delay period expires the target is no longer designated as a TOI.
1. AIS targets
2. Radar targets
3. Intel targets
4. DSC targets
5. Received TOI
Note:
Received OneShot TOIs use the standard received TOI icons for the duration of both delay periods
and will then disappear.

TOI OneShot settings

TOI OneShot decay times and automatic repeat for sending / broadcasting the related STEDS
message can be adjusted.
TOI OneShot settings are accessed from the Advanced set-up menu: Homescreen > Settings >
Responder > Advanced set-up > Configure.
The following settings are available:
• T1 — Number of seconds for the initial delay period.
216