Autoroute; Use Autorouting During Route Creation - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

1. Select and hold on the location for the first waypoint.
2. Select Build route from the context menu.
3. Select the location for the second waypoint.
The 2 waypoints will be joined by a line, creating the first leg of your route.
4. Select the location for subsequent waypoints.
5. Check your Route will be safe to follow, you can move the waypoints in your route by dragging
them to a new location.
6. When your Route is complete select Finish route build.

Use Autorouting during route creation

Whilst building a route you can use Autorouting to automatically add a route leg to a route you have
already started to create. The Autorouting features require compatible cartography.
1. Press and hold anywhere on screen and select either Autoroute to wpt or Autoroute to here.
Selecting Autoroute Autoroute to to to wpt

Autoroute

in your route, selecting Autoroute
Once an Autoroute leg has been added you can select Finish route build or add further manual or
autoroute route legs.
Autoroute
Autoroute is available when using compatible cartography. Autoroute allows you to build a route
automatically between a point on the chart and your vessel.
You can select any point on the Chart and from the Chart context menu select Autoroute to here or
you can select Autoroute to from an existing waypoint's context menu to create a route automatically
between your vessel and the chosen point.
The created route is generated by comparing data available on your cartography against the
minimum safe distances specified in the Boat details menu: (Homescreen > Settings > Boat details).
Waypoints will not be placed in areas that conflict with your specified minimum safe distances.
Caution symbols are used for waypoints that are near objects or restricted areas.
Never follow a route before checking each route leg is safe for your vessel.
Waypoints, Routes and Tracks
wpt will allow you to select a waypoint from your Waypoints list to include wpt
Autoroute to to to here here will create a route leg to the cursor's current position.
Autoroute here
115