Creating A Track; Converting A Track To A Route; Track Management - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

Creating a track

You can record your vessel's journey using Tracks.
1. Select and hold on your vessel icon to display the vessel pop-over options.
2. Select Start track.
Your vessel's journey will now be recorded.
3. Select Stop track from the pop-over options when you have completed your track.
4. Select Save to save the track or Delete to remove the track.
You can also start a new track recording at anytime from the Chart menu: Menu > New > Start a new
track. When using the Chart menu to start a track, if a track is already recording then it will be saved
before the new track is started. Once a Track is saved it can be converted to a Route so that the
same passage may be followed again at a later date.

Converting a track to a route

From the Track list: Menu > Waypoints, routes, tracks > Tracks.
1. Select a track.
2. Select Create route from track from the pop-over options.
3. Select OK.

Track management

Tracks are managed using the Track list.
The Track list can be accessed from the Homescreen and from the Chart app: Homescreen > My
data > Tracks, or Chart app > Menu > Waypoints, routes, tracks > Tracks.
If the Track list is accessed from the Chart app menu, then the selected track is displayed in a
Chart pane on the right of the screen.
Waypoints, Routes and Tracks
119