Removing The Rc Cable; Uav Controller Connection - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

Removing the RC cable

The RC cable used for connecting the UAV's primary controller to a mobile device must be removed,
before connecting the controller to your MFD.

UAV controller connection

Your MFD's accessory connection must be connected to your UAV's primary remote controller using
a USB "Micro B" to USB "A" cable.
Note:
• The UAV can NOT be connected to your MFD via the RCR-SDUSB. The card reader must be
disconnected to enable connection to a UAV.
• The UAV can only be controlled by the MFD that the controller is connected to.
UAV (Unmanned Aerial Vehicle) app
377