Engaging And Disengaging The Autopilot - Physical Buttons; Disengaging The Autopilot; Pilot Sidebar; Pilot Sidebar — Standby - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

Engaging and disengaging the autopilot - physical buttons

The process for engaging your autopilot using the physical buttons available on a RMK remote
keypad or an Axiom Pro is shown below.
1. Press and hold the Pilot button to engage the autopilot in Locked heading mode.
2. Press the Pilot button again to disengage the autopilot.

Disengaging the autopilot

You can disengage your autopilot at any time by selecting the Disengage pilot icon.
The Disengage pilot icon is available in all apps. It is also available on the Pilot sidebar, in Pilot pop
up messages, on the Homescreen and on the Shortcuts page.

6.3 Pilot sidebar

Depending on the state of your autopilot the following information and controls are available
on the Pilot sidebar.
Note: The Pilot sidebar is controlled using the Touchscreen.
Pilot sidebar — Standby
1
Sidebar selection
Enables you to switch between Pilot and Data sidebars.
2 Close
Closes the Pilot sidebar.
104