Ar200 Setup For Augmented Reality; Clearcruise Object Detection (Video Analytics) Overview - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

Important:
Calibrating the horizon correctly is essential for accurate Augmented Reality overlay. Calibrating
on calm water and in clear sight of the horizon is recommended.

17.3 AR200 setup for Augmented Reality

Before using the Augmented Reality features, it's important to correctly install and setup the AR200
Augmented Reality sensor.
Refer to the AR200 Installation manual (87372) to determine the correct physical installation and
connections for using the AR200 as part of an Augmented Reality system.
17.4 ClearCruise™ Object Detection (Video Analytics) overview
The Object Detection (Video Analytics) features provide audible and visual alerts when "non-water"
objects are identified by connected M100/M200/M300 Series cameras.
Objects that visually differ from the water will be identified by the camera as a "non-water" object.
The following features are available with Object detection:
• Highlight detected objects — Enables/disables object highlighting, which automatically identifies
and highlights "non-water" objects.
• Beep on detection — Enables/disables an audible beep when an object is detected (Highlight
detected objects must be enabled)
• Display estimated range — Enables/disables display of an object's estimated range from your
vessel (Highlight detected objects must be enabled, and object must be closer than approximately
100 m (~300 ft)).
ClearCruise (Object Detection / Video Analytics, and
Augmented Reality)
341