Activating Your Siriusxm Receiver; Lighthouse Software Version; Sr200 Diagnostics Mode - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

10.2 Activating your SiriusXM receiver

Your MFD is compatible with the SR150 and SR200 SiriusXM receivers. Your receiver must be
activated before you can use Weather mode on your MFD.
Note:

Lighthouse Software Version

• LH3.10 – SR200 SiriusXM receiver for Weather mode is compatible on all Axiom Multifunction
Displays on the same network as the data master.
The following information is required to activate your SiriusXM receiver:
• Electronic Serial Number (ESN) — The ESN is printed on the product label located on the underside
of your SiriusXM receiver. You can also access the ESN from the Weather settings tab in the Chart
app: (Menu > Settings > Weather > Receiver ESN).
• Current billing information (if you already have a valid subscription).
• Desired subscription package.
1. Obtain your SiriusXM receiver's ESN.
2. Visit the Sirius Marine Weather website: http://www.siriusxm.com/sxmmarine, and choose a
subscription package.
3. Follow the "Activate Now" link to activate your receiver online. Alternatively, call
1–855–796–9847.
Once your SiriusXM receiver is activated, you will be able to enable Weather mode and display
Weather layers in the Chart app. To enable Weather mode, open the Chart app and select WEATHER.

SR200 diagnostics mode

The SR200 diagnostic mode can be accessed from the audio settings menu from the master MFD on
the network. The diagnostics mode should be referred to when liaising with Sirius product support.
1. Reset — Performs a factory reset and power cycle of the SR200.
2. Diagnostics mode — Displays the SR200's diagnostic information.
Weather receiver status
The status of your weather receiver is displayed in the app info area in the bottom left of the screen.
The app info area displays:
• chart orientation mode — (N-up) orientation is fixed in weather mode.
• signal strength of your Weather receiver:
Weather mode 229