Camera Setup - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

• M-Series camera (M100, M200 and M300 Series)
• M100 / M200-Series cameras require LightHouse™ software version 3.9 or later.
• M300-Series cameras require LightHouse™ software version 3.10.71 or later.
Important:
Cameras utilizing ClearCruise™ Augmented Reality are subject to an unstable image on rough
waters.
Note: ClearCruise's performance is dependent on environmental conditions and is not a
replacement for maintaining a visual watch.

17.2 Camera setup

Before using the Augmented Reality features, it's important to correctly install and setup your
compatible camera.
Refer to your camera's installation manual to determine the correct physical installation and
connections for using the camera as part of an Augmented Reality system.
A number of additional camera-related settings and calibrations must be completed in the Video app
before Augmented Reality features can be used:
• Camera height above the waterline.
• Camera direction.
• Camera horizontal field of view [not required for cameras which auto assign their field of view].
• Horizon calibration.
Note:
• The camera's height above the waterline and camera's view direction need to be physically
measured for accurate camera installation.
• The camera's horizontal field of view can be found in your camera's installation manual
specification.
ClearCruise (Object Detection / Video Analytics, and
Augmented Reality)
337