Mfd Physical Buttons; Physical Mfd Buttons - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

4.1 MFD physical buttons

The table below shows the physical buttons that are available on LightHouse™ 3 compatible MFDs
and remote keypads, along with their function.
Note:
• Where 2 button symbols are shown, the symbols on the left represent Axiom™ Pro variant MFDs
or RMK-10 keypad, and the symbols on the right represent an eS Series MFD or RMK-9 keypad.
• Axiom MFDs and gS Series MFDs only have a single power button.

Physical MFD buttons

Control Button
Home
Menu
User Programmable Button (UPB)
(1)
Waypoint / MOB
Power
(2) Power swipe
Pilot
Switch
Back
Range In
38
Function
Press to display the Homescreen.
Press to open or close menus.
You can select which function this
button controls. Refer to
function to the User Programmable
Button (UPB)
for more information.
Press momentarily to place a waypoint
at your vessel's location. A long press
activates the Man overboard (MOB)
alarm.
Press to power on the MFD. When
the MFD is powered on, pressing this
button displays the Shortcuts page.
Swipe to power on the MFD. When the
MFD is powered on, swipe again to
display the Shortcuts page.
Press momentarily to display or hide
the Pilot sidebar. A long press engages
the autopilot in locked heading mode,
or disengages an active autopilot.
Press momentarily to switch the active
pane in a splitscreen page. A long
press expands the selected pane.
Press to return to the previous menu
or dialog.
Press to Range or Zoom In.
Assigning a