Registration Failed; No Connection Detected; Uav App - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

Registration failed

The registration failed notification is displayed if the DJI servers cannot be reached. Registration will
be re-attempted automatically. If the failure persists, check your Wi-Fi and internet or try again later.

No connection detected

After successful registration, the 'No connection detected' notification is displayed. Connect the
USB A end of your USB cable to the UAV's primary controller. Once a successful connection is
established, the notification will be closed.

UAV app

Once your UAV is correctly set up and connected to your MFD and your MFD's UAV app is registered
successfully, the UAV's video feed is displayed and the app is ready to be used as an auxiliary
controller for your UAV.
UAV (Unmanned Aerial Vehicle) app
381