Table of Contents
Advertisement
Customizing the splashscreen
The standard AXIOM splashscreen, displayed on start up, can be customized on Axiom™, Axiom™
Pro, and Axiom™ XL displays.
Custom Image requirements:
• The customized image must be in .png, .bmp or .jpg format.
• Custom images cannot exceed the maximum resolution supported by your MFD.
• For optimum image quality, the resolution of the splashscreen image should match the resolution
of your MFD. Refer to the following table:
Note:
• Splashscreen settings are unique to each MFD and are not shared across the network with
other MFDs.
• Custom splashscreens are not available on eS Series and gS Series MFDs that have been
upgraded to run LightHouse 3 software.
1. Save your custom image to a MicroSD card and insert the card into a card reader slot on your
MFD or connected card reader.
2. Select This display from the Settings menu: Homescreen > Settings > This display.
3. Select the image name next to Splashscreen:.
The file browser is displayed.
4. Browse to your custom image and select it.
5. Select Yes .
The image is imported to your MFD's internal storage.
The next time your MFD powers up, your custom image will be displayed.
Axiom screen resolutions
The screen resolutions for Axiom™, Axiom™ Pro, and Axiom™ XL displays are shown below.
MFD variant
Axiom™ 7+
Axiom™ 9+
Axiom™ 12+
Axiom™ 7
Axiom™ 9
Axiom™ 12
Axiom™ Pro 9
Axiom™ Pro 12
Axiom™ Pro 16
Axiom™ XL 16
Axiom™ XL 19
Axiom™ XL 22
Axiom™ XL 24
Resetting the splashscreen graphic
1. Select This display from the Settings menu: Homescreen > Settings > This display.
2. Select the Reset from the Splashscreen section.
3. Select Yes .
The next time your MFD starts up the standard AXIOM splashscreen will be displayed.
Homescreen
Axiom screen
resolutions.
Screen resolution (W x H)
1024 x 600
1080 x 720
1280 x 800
800 x 480
800 x 480
1280 x 800
1280 x 720
1280 x 800
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1200
91
Advertisement
Table of Contents
Troubleshooting
