Camera Motion Tab; Maritime (M-Series) Camera Compatibility - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

ClearCruise tab (Object Detection) / (Video Analytics)
Settings
Highlight detected
objects
Beep on detection
Display estimated
range

Camera motion tab

Settings
Camera height
above the
waterline
Set forward
position
Man overboard
Dangerous AIS
targets
Dangerous MARPA
targets
Enable scan
Scan width
Scan speed
Page settings
Settings
Edit data overlays

16.4 Maritime (M-Series) camera compatibility

Support for the various video features and settings, as per each M-Series camera variant.
For an explanation of the settings listed in the following table, refer to:
Not applicable to product
Applicable to product
Video app
Description
Uses proprietary ClearCruise™ technology to
highlight and track objects detected in the water.
When enabled, the MFD will audibly beep when
an object is detected.
When enabled, the MFD will display an estimated
range for highlighted objects (objects must be
closer than 300 ft).
Description
To ensure correct alignment of the camera for
tracking purposes the height the camera has
been installed at, above the waterline, must be
set.
Adjust the Forward position of your camera
Enables and disables automatic tracking of a
MOB alarm.
The most recent target is tracked.
Enables and disables automatic tracking of
Dangerous AIS targets.
The most recent target is tracked.
Enables and disables automatic tracking of
Dangerous Radar targets.
The most recent target is tracked.
Enables and disables Surveillance mode.
Surveillance mode pans the camera left to right
continuously to the specified speed
Determines how far the camera pans from left to
right when in Surveillance mode.
Determines the speed at which the camera pans
from left to right when in Surveillance mode.
Description
Add data overlays to video feed.
Options
• Disable
• Enable
• Disable
• Enable
• Disable
• Enable
Options
• 0ft to 99ft
Displays the forward
alignment picture
• Disable
• Enable
• Disable
• Enable
• Disable
• Enable
• Disable
• Enable
• Narrow
• Medium
• Wide
• Slow
• Medium
• Fast
Options
• List of data overlays
p.326 — Video app settings
—
329