Creating A Creeping Line / Parallel Line Search Pattern; Csp Shortcut - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

Creating a Creeping line / Parallel line search pattern

To create a Creeping line / Parallel line search pattern follow the steps below:
1. Set Commence Search Point (CSP)
i. Manually input the CSP coordinates.
ii. Alternatively, set the CSP as your vessel's current location by pressing the
button.
2. Set Search Speed, and Track Spacing
i. Select and edit each variable.
3. Define Search Rectangle (Define by axes)
i. Define the rectangle's dimensions by using the Major axis and Minor axis boxes.
ii. Set the Creep / Parallel direction manually or set it as your Vessel's heading by using the
Shortcut button.
(2)
iii. Set the 1st turn direction by selecting Port or Starboard.
Variable
Track spacing / Radius
Search Speed
Major / Minor Axis
1.

CSP Shortcut

2. Creep / Parallel Direction Shortcut
4. Define Search Rectangle (Define by corner points)
Chart app
Maximum Value
5 nm / 5 sm / 5 Km
40 Kts / 46 Mph / 74 Kph
20 nm / 23 sm / 37 Km
CSP Shortcut
(1)
183