Chart; Radar; Fishfinder; Dashboard - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

62
Chart — The Chart app displays electronic cartographic information from
your Chart cards and when used in conjunction with a GNSS receiver,
plots your vessel's position. The Chart app can be used to mark specific
locations using Waypoints, build and navigate Routes or keep a record
of where you have been by recording a Track.
For more information refer to
Radar — The Radar app is a situational awareness aid that displays
a graphical representation of your surroundings in relation to your
vessel using the echo/target returns from a connected Radar scanner.
The Radar app allows you to track targets and measure distances and
bearings.
For more information refer to
Fishfinder — The Fishfinder app uses a connected sonar module and
transducer to help you to find fish by building up an underwater view
of bottom structure and targets in the water column covered by your
transducer.
For more information refer to
Audio — The Audio app allows you to control audio from a connected
compatible entertainment system.
For more information refer to
Dashboard — The Dashboard app provides data readings from
connected sensors and equipment. The Dashboard app is also used for
controlling, configured, compatible, Digital Switching hardware.
For more information refer to
Video — The Camera app allows you to control and view feeds coming
from connected video equipment such as an IP camera or Thermal
camera.
For more information refer to
UAV — The UAV (Unmanned Aerial Vehicle) app provides remote
controls, settings and video display, including flight data for your
compatible UAV device.
For more information refer to
p.373 — UAV (Unmanned Aerial Vehicle) app
p.121 — Chart app
p.255 — Radar app
p.241 — Fishfinder app
p.355 — Audio app
p.289 — Dashboard app
p.321 — Video app