Adjusting Brightness; Display Mode - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

Press or swipe the Power button to display the Shortcuts page and then select the speaker symbol
to display the Bluetooth volume control for LightHouse™ apps and MFD alarms.

Adjusting brightness

LCD brightness can be adjusted from the Shortcuts page.
With the Shortcuts page displayed (accessible via the Power button):
1. Move the Display brightness control along the slider bar to adjust the brightness.
With the Shortcuts menu displayed you can also use the Power
area to increase the brightness level in increments, by repeating the left to right swipe. Please
note, the swipe area is only available on Axiom™ or Axiom™ XL displays.

Display mode

You can change your MFD's display mode.
Press or swipe the Power button to display Shortcuts and then select the Display mode symbol to
switch between Day, Night, and Extra dark display modes.
You can adjust the Display mode to suit the time of day:
1. Day — White user interface and a light background.
2. Night — Red user interface and a dark background.
3. Extra dark — Red user interface and a very dark background.
Note: Night mode must be active before Extra dark can be selected.
52
Power button or the Power Power button swipe
Power Power