Installing Cumulative Updates - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

2. Copy the folder and all contents to the root directory of your memory card.
3. Copy the received cell permits file to the root directory of the same memory card.
4. Insert the memory card into your MFD's card reader.
5. Open the Chart app's Cartography selection tab: Chart app > Menu > Settings > Cartography.
6. Select Update S-63 charts.
7. Select the card reader that contains the base cell files and cell permits file.
The card will be scanned for valid files and permits, this process can take some time. Once
complete a list of available chart cells is displayed.
8. Select Select all, or select individual cells.
9. Select Update selected charts to install all base cells.
10. Select the card reader slot where you want the files to be installed.
Important:
The same 'Installed charts' card and memory card slot MUST be used to install and update base
cell files and cumulative update files.
11. Wait for the installation to complete.
A progress bar is displayed as the base cells are installed.
12. Select OK on the successfully imported notification.
Note:
The installation process will create and store chart data in 2 folders on your memory card: 'senc'
and 'seapilot', Overwriting, deleting or altering these folders or data within them will render your
charts inoperable.

Installing cumulative updates

When purchasing S-63 Encrypted Charts for the first time and as part of regular updates any available
cumulative updates require installation. The cumulative update files contain updated cartographic
data.
Typically cumulative update files are made available fortnightly on the vendor's web server.
Note:
• Cumulative update files should be installed after the installation of base cell files.
• If a new cell permits file is received, this must be installed with the cumulative update.
• It is recommended that base cell files, cumulative update files and the resulting installed chart
files are all stored on separate memory cards, e.g.:
– Card 1 = Base cell and the cell permits file.
– Card 2 = Cumulative update files and if applicable the new cell permits file.
– Card 3 = Installed charts (location that base cell files, cell permits file and cumulative update
files are installed).
Important:
If your chart vendor does not supply cumulative update files then updates must be installed
separately and in release date order.
1. Unzip the downloaded cumulative update file, using the 'Extract all' option of your PC's zip
file application.
This ensures that the cumulative update files are created within a folder named the same as the
original zip file.
2. Copy the folder and all contents to the root directory of your memory card.
3. If required, copy the new cell permits file to the root directory of the same memory card.
136