Calibrating Tanks - Raymarine LIGHTHOUSE 3 Advanced Operation Instructions

Option
Engine manufac-
turer:
[Num of engines 2
only]
Configure Yamaha
Quad display:
Num of Batteries:
Tanks:
Num of interior
environment
sensors:

Calibrating tanks

When displaying tank levels on your MFD it's important to ensure the levels are correctly calibrated.
Failure to do so may result in inaccurate level readings.
Tanks can be calibrated and edited on the Boat details page: Homescreen > Settings > Boat details.
Tanks can be calibrated with the following Oceanic Systems tank senders:
• 3271 Volumetric Fuel Sender
• 3281 Water Level Senders
• 3125 Tank Sender Adapter
• 4291 Tank Level Adapter
Note:
• Ensure tanks are empty before calibration.
• Completing calibration will overwrite any existing calibration already recorded.
1. Press configure
2. Select the tank you want to calibrate; a dialog will be displayed
3. Set the tank's capacity
4. Select calibrate and choose the desired method for tank calibration:
i. Run wizard
ii. Import calibration
86
Description
To interface with Yamaha , Yamaha HDMI and Mercury gateways select
the relevant manufacturer from the list. Otherwise select Other.
Select whether your MFD is displaying for a twin engine system, or for the
port or starboard side of a quad engine system.
Configures your system with the number of batteries on your vessel.
Calibrate your vessel's tanks.
Allows the display of multiple instances of interior temperature and
humidity sensor's data. Up to 10 sensors can be used.