Siemens SIMATIC RF300 System Manual page 97

Transponder
MDS D424
MDS D460
1) Values of > 100 % can occur if transponders were developed specifically for mounting in/on metallic
surroundings.
4.4 Mechanical resistance of the readers and transponders
SIMATIC RF300 is a contactless identification system that meets high mechanical requirements
for shock and vibration (EN 60721-3-7 class 7). Use the readers/transponders only for their
intended use. They are not designed to withstand high mechanical stress and impact to the
enclosure may cause damage and failure.
4.5 Chemical resistance of the readers and transponders
4.5.1 Readers
4.5.1.1 Overview of the readers and their housing materials
Resistance to chemicals depends on the housing materials used to manufacture the reader. The
following table provides you with an overview of the housing materials that are used with the
RF300 readers:
Table 4-66
Individual part of the reader
Top cover and bottom
Fiber-optic cable
Decorative membrane
Socket
1) Non-relevant component for resistance of complete housing
In case of questions please contact Siemens Support (section "Service & Support (Page 473)").
SIMATIC RF300
System Manual, 02/2021, C79000-G8976-C345-09
Without metal
Without metal
Overview of the materials of the reader components
1)
1)
4.5 Chemical resistance of the readers and transponders
Without metal
100
100
Housing material of the reader
Polyamide 12;
The chemical resistance of this plastic is listed in the following section
"Polyamide 12".
Makrolon®2405
Autotex V200
Brass (copper alloy)
CuZn40Pb2
Planning the RF300 system
Reader RF382R (ISO mode)
On metal
105
115
1)
1)
97