Siemens SIMATIC RF300 System Manual page 36

System overview
3.3 System configuration
Figure 3-4 Example of engine block production
3.3.3 Example of container and cardboard container handling: Use of ISO
transponders
Containers of varying sizes are conveyed to picking workstations in a delivery center. There, the
individual goods are removed and packed in cartons according to the delivery note. These
cartons are marked with low-cost transponder labels and sorted to small or large packaging
workstations (according to the delivery note) by being guided or transported via the
corresponding conveyor system. The containers are marked using the MDS D100 ISO
transponder.
Advantages at a glance:
• Decision points in the conveyor system can be installed in a more favorable way
(mechanically)
• Different sizes of containers with different depths can be identified due to the range
36
System Manual, 02/2021, C79000-G8976-C345-09
SIMATIC RF300