Siemens SIMATIC RF300 System Manual page 293

The simulation results in the following:
Following a simulation time of 36.5 hours, a total of 3 cycles were carried out, and an internal
temperature of 90 degrees Celsius was reached.
Figure 7-29
7.8.5 Cleaning the mobile data memory
Note
Do not clean the transponder with mechanical tools, sand-blasting or pressure hose. These
cleaning methods result in damage to the transponder.
Clean the transponder only with the chemical cleansing agents listed in Chapter Chemical
resistance of the readers and transponders (Page 97).
SIMATIC RF300
System Manual, 02/2021, C79000-G8976-C345-09
Complete temperature response due to simulation
RF300 transponder
7.8 SIMATIC RF380T
293