Siemens SIMATIC RF300 System Manual page 191

Hide thumbs Also See for SIMATIC RF300:

The SIMATIC Ident products meet the requirements of explosion protection acc. to ATEX. The

products meet the requirements of the standards:

You will find the current versions of the standards in the currently valid ATEX certificates.

Validity only when the devices are marked

There is a corresponding approval only with devices to which the Ex mark is applied.

The identification of the electrical equipment is:

-25 °C < Ta < +70 °C

= 24 V DC, 130 mA

The equipment also has the following additional information:

DEMKO 17 ATEX 1767 X

SIMATIC RF300

System Manual, 02/2021, C79000-G8976-C345-09

Hazardous areas

Part 0: Equipment - General requirements

Hazardous areas

Part 7: Equipment protection by increased safety "e"

Hazardous areas

Part 31: Equipment dust ignition protection by enclosure "t"

II 3 G Ex ec IIB T4 Gc

II 3 D Ex tc IIIC T80 °C Dc

[= serial number, is assigned during production]

[= certificate number]

5.5 SIMATIC RF380R