Siemens SIMATIC RF300 System Manual page 335

Hide thumbs Also See for SIMATIC RF300:

(in conjunction with fixing pocket 6GT2190-0AB00)

Fixing pocket

(in conjunction with spacer 6GT2190-0AA00)

Fixing pocket

(not suitable for fixing directly onto metal)

Metal-free area

Direct mounting of the transponder on metal is not permitted. A distance of ≥ 20 mm is

recommended to avoid a reduced read/write range and a reduction of the field data. This can be

accomplished, for example, by installing a spacer.

Note that if the distances (a and h) are not observed, this may result in a reduction of the field

data as well as a reduced write/read range.

Mounting on metal

SIMATIC RF300

System Manual, 02/2021, C79000-G8976-C345-09

Ordering data for MDS D200 accessories

Mounting the MDS D100 / D200 / D400 on metal with spacer

ISO transponder

8.10 MDS D200

Article number

6GT2190-0AA00

6GT2190-0AB00

6GT2390-0AA00