Siemens SIMATIC RF300 System Manual page 278

RF300 transponder
7.6 SIMATIC RF360T
7.6.2 Ordering data
Table 7-11
RF360T
8 KB FRAM user memory
RF360T
32 KB FRAM user memory
Table 7-12
Spacer
(in conjunction with fixing pocket 6GT2190-0AB00)
Fixing pocket
(in conjunction with spacer 6GT2190-0AA00)
7.6.3 Mounting on metal
Direct mounting of the RF360T on metal is not allowed. A distance ≥ 20 mm is recommended.
This can be achieved using the spacer 6GT2190‑0AA00 in combination with the fixing pocket
6GT2190‑0AB00.
Mounting of RF360T on metal
h
Figure 7-17
The standard value for h is ≥ 20 mm.
278
Ordering data RF360T
Ordering data for RF360T accessories
Data storage unit
Mounting of RF360T with spacer
Article number
6GT2800-4AC00
6GT2800-5AC00
Article number
6GT2190-0AA00
6GT2190-0AB00
Metal
Non-metal
System Manual, 02/2021, C79000-G8976-C345-09
SIMATIC RF300