Siemens SIMATIC RF300 System Manual page 313

8.5 MDS D126
8.5.1 Characteristics
MDS D126
8.5.2 Ordering data
Table 8-12
MDS D126
Table 8-13
Spacer
8.5.3 Mounting on metal
Direct mounting of the transponder on metal is not permitted. A distance of ≥ 20 mm is
recommended to avoid a reduced read/write range and a reduction of the field data. This can be
accomplished, for example, by installing a spacer.
Note that if the distances (a and h) are not observed, this may result in a reduction of the field
data as well as a reduced write/read range.
SIMATIC RF300
System Manual, 02/2021, C79000-G8976-C345-09
Characteristics
Area of application
Memory size
Write/read range
Mounting on metal
ISO standard
Degree of protection
Ordering data for MDS D126
Ordering data for MDS D126 accessories
Compact and rugged ISO transponder, suitable for iden‐
tification of transport units in production-related logis‐
tics.
Can also be deployed in harsh environmental condi‐
tions.
112 bytes of EEPROM user memory
See section "Field data of ISO transponders (MDS D)
(Page 53)"
Yes, with spacer
ISO 15693
IP68
Article number
6GT2600-0AE00
Article number
6GT2690-0AL00
ISO transponder
8.5 MDS D126
313