Siemens SIMATIC RF300 System Manual page 128

Readers
5.1 SIMATIC RF310R
ISO 14443 functionality
You can use ISO 14443 transponders with all readers of the 2nd generation of the RF300 family
- except the RF360R. The 2nd generation RF300 readers thus replace the MOBY E-Reader SLG 72
and SLG 75. Note that the readers for RF300, ISO 15963 or ISO 14443 operation must have
parameters assigned. The parameter assignment done with the aid of the RESET frame (INIT-
Run).
The following commands are supported by the 2nd generation readers in ISO 14443 operation:
• READ
• WRITE
• MDS-STATUS (mode 3)
• INIT
• REPEAT
Special ISO 14443 commands such as "INCREMENT", "DECREMENT" or "SET-VALUE" are not
supported.
5.1 SIMATIC RF310R
5.1.1 Features
SIMATIC RF310R
128
Characteristics
Design
Area of application
①
RS-422 interface
②
LED operating display
Identification tasks on small assembly lines in
harsh industrial environments
System Manual, 02/2021, C79000-G8976-C345-09
SIMATIC RF300