Siemens SIMATIC RF300 System Manual page 145

Cable length for RS-422 interface, maximum
LED display design
Standards, specifications, approvals
Proof of suitability
MTBF
The output power of the readers at the antenna (antenna input) does not correspond to the transmit
1)
power or radiated power of the device.
5.2.9 Approvals
FCC information
Siemens SIMATIC RF310R (MLFB 6GT2801-1BA20-0AX1); FCC ID NXW-RF310R
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Caution
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
IC information
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
SIMATIC RF300
System Manual, 02/2021, C79000-G8976-C345-09
5.2 SIMATIC RF310R with Scanmode
1000 m
2 LEDs, 5 colors
Radio to R&TTE directives EN 300330,
EN 301489, CE, FCC, UL/CSA
170 years
Readers
6GT2801-1BA20-0AX1
145