Siemens SIMATIC RF300 System Manual page 231

6.5.7 Dimension drawing
Figure 6-24
6.6 ANT 18
6.6.1 Characteristics
The ANT 18 is designed for use in small assembly lines. Due to its small, compact construction,
the antenna can be easily positioned for any application using two plastic nuts (included in the
package). The antenna cable can be connected at the reader end.
ANT 18
6.6.2 Ordering data
Table 6-9
Antenna
ANT 18
(incl. one integrated antenna connecting cable 0.6 m)
ANT 18
(including one integrated antenna connecting cable 3 m)
SIMATIC RF300
System Manual, 02/2021, C79000-G8976-C345-09
Dimension drawing ANT 12 (all values in mm)
Characteristics
Area of application
Read/write distance
Connecting cable
Connectable readers
Degree of protection
Ordering data ANT 18
Small assembly lines
up to 35 mm (depending on the transponder)
3 m or 0.6 m
RF350R and RF350M:
IP67 (front)
Antennas
6.6 ANT 18
Article number
6GT2398-1CA10
6GT2398-1CA00
231