Siemens SIMATIC RF300 System Manual page 306

ISO transponder
8.4 MDS D124
Type of mounting
Standards, specifications, approvals
MTBF
The values for shock and vibration are maximum values and must not be applied continuously.
1)
The processing instructions of the adhesive manufacturer must be observed.
2)
8.3.5 Dimension drawing
Figure 8-6
8.4 MDS D124
8.4.1 Characteristics
MDS D124
306
Dimensions in mm
Characteristics
Area of application
Memory size
Write/read range
Mounting on metal
ISO standard
Degree of protection
• Fixing pocket
• Glued 2)
228 years
Areas of application in production automation
Can also be used in harsh environments under extreme
environmental conditions (e.g. temperature stress up
to +180 °C).
112 bytes of EEPROM user memory
See section "Field data of ISO transponders (MDS D)
(Page 53)"
Yes, with spacer
ISO 15693
IP68/IPx9K
System Manual, 02/2021, C79000-G8976-C345-09
6GT2600-0AG00
SIMATIC RF300