Siemens SIMATIC RF300 System Manual page 390

ISO transponder
8.24 MDS D522
Mounting information for screws
You can screw the transponder into a pre-drilled threaded hole using the screw-in aid.
Mounting information for adhesion
• Drill installation hole
• The adhesive surfaces must be dry, free from dust, oil, stripping agents and other impurities
• Apply adhesive according to the manufacturer's processing instructions
• Press in MDS D422 / D522 using your fingers; with antenna to the outside
• Remove residues of adhesive
• Allow to cure according to the manufacturer's instructions
• Flush-mounting of MDS D422 / D522 in metal with tools
8.24.4 Technical specifications
Table 8-66
Product type designation
Memory
Memory configuration
•
•
Read cycles (at < 40 ℃)
Write cycles (at < 40 ℃)
Data retention time (at < 40 ℃)
Write/read distance (S
Mechanical specifications
Enclosure
•
•
Recommended distance to metal
Power supply
Permitted ambient conditions
Ambient temperature
•
390
Technical specifications for MDS D522
UID
User memory
)
g
Material
Color
during write/read access
SIMATIC MDS D522
• 8 bytes
• 8192 bytes FRAM
> 10
12
> 10
12
> 10 years
Dependent on the reader used, see section "Field
data of ISO transponders (MDS D) (Page 53)"
• Plastic PA 6.6 GF; brass nickel plated
• Black/silver
≥ 0 mm
Inductive, without battery
• -25 ... +85 °C
System Manual, 02/2021, C79000-G8976-C345-09
6GT2600-5AF00
SIMATIC RF300