Siemens SIMATIC RF300 System Manual page 138

Readers
5.1 SIMATIC RF310R
Degree of protection according to EN 60529
Shock-resistant acc. to EN 60721-3-7, Class 7 M2
Vibration-resistant acc. to EN 60721-3-7, Class 7
M2
Torsion and bending load
Design, dimensions and weight
Dimensions (L x W x H)
Weight
Type of mounting
Cable length for RS-422 interface, maximum
LED display design
Standards, specifications, approvals
Proof of suitability
MTBF
The output power of the readers at the antenna (antenna input) does not correspond to the transmit
1)
power or radiated power of the device.
5.1.10 Approvals
FCC information
Siemens SIMATIC RF310R (MLFB 6GT2801-1BA10); FCC ID NXW-RF310R02
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Caution
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules.
138
6GT2801-1BA10
6GT2801-1BA10-0AX2
IP67
500 m/s
2
200 m/s 2
Not permitted
75 x 55 x 30 mm
100 g
4 x M5 screws;
1.5 Nm
1000 m
2 LEDs, 5 colors
Radio according to R&TTE directives EN 300330,
EN 301489, CE, FCC, UL/CSA (IEC 61010),
Ex approval (only 6GT2801-1BA10-0AX2)
273 years
System Manual, 02/2021, C79000-G8976-C345-09
SIMATIC RF300