Siemens SIMATIC RF300 System Manual page 361

8.16.3 Mounting in metal
Flush-mounting
Figure 8-42
Mounting information for screws
You can screw the transponder into a pre-drilled threaded hole using the screw-in aid.
Mounting information for adhesion
• Drill installation hole
• The adhesive surfaces must be dry, free from dust, oil, stripping agents and other impurities
• Apply adhesive according to the manufacturer's processing instructions
• Press in MDS D422 / D522 using your fingers; with antenna to the outside
• Remove residues of adhesive
• Allow to cure according to the manufacturer's instructions
• Flush-mounting of MDS D422 / D522 in metal with tools
8.16.4 Technical specifications
Table 8-46
Product type designation
Memory
Memory configuration
•
•
SIMATIC RF300
System Manual, 02/2021, C79000-G8976-C345-09
Flush-mounting of MDS D422 / D522 in metal without clearance
Technical specifications for the MDS D422
UID
User memory
SIMATIC MDS D422
• 8 bytes
• 2000 bytes FRAM
ISO transponder
8.16 MDS D422
6GT2600-4AF00
361