Siemens SIMATIC RF300 System Manual page 235

Shock-resistant according to EN 60721-3-7 Class 7
M2
Vibration-resistant according to EN 60721-3-7
Class 7 M2
Design, dimensions and weight
Dimensions (∅ x thread x L)
Weight
Type of mounting
Cable length
Warning: The values for shock and vibration are maximum values and must not be applied continuously.
1)
6.6.7 Dimension drawing
Figure 6-29
6.7 ANT 30
6.7.1 Characteristics
The ANT 30 is designed for use in small assembly lines. In comparison to ANT 18, the maximum
write/read distance is approximately 60% larger. Due to its compact construction, the antenna
can be easily positioned for any application using two plastic nuts (included in the package). The
antenna cable can be connected at the reader end.
ANT 30
SIMATIC RF300
System Manual, 02/2021, C79000-G8976-C345-09
1)
1)
Dimension drawing ANT 18 (all values in mm)
Characteristics
Area of application
Read/write distance
Connecting cable
Connectable readers
Degree of protection
500 m/s
2
200 m/s
2
M18 x 1 x 55 mm
130 g
2x plastic nuts M18 x 1
3 m or 0.6 m
Small assembly lines
up to 55 mm (depending on the transponder)
3 m
RF350R and RF350M:
IP67 (front)
Antennas
6.7 ANT 30
6GT2398-1CA00
6GT2398-1CA10
235