Siemens SIMATIC RF300 System Manual page 222

Antennas
6.4 ANT 8
6.3.6 Dimension drawing
Figure 6-14
6.4 ANT 8
6.4.1 Characteristics
The ANT 8 is primarily envisaged for tool identification applications. The extremely small design
of the antenna allows extremely accurate positioning. The antenna cable can be connected at
the reader end and screwed to the antenna.
The ANT 8 antenna is currently only tested and approved for use in conjunction with the RF350M
mobile reader and the RF350R reader (2nd generation).
ANT 8
6.4.2 Ordering data
Table 6-6
Antenna
ANT 8
(without antenna cable)
ANT 8
(including one plug-in antenna cable 3 m)
222
Dimension drawing ANT 3S (all values in mm)
Characteristics
Area of application
Read/write distance
Connecting cable
Connectable readers
Degree of protection
Ordering data ANT 8
Tool identification
up to 4 mm (depending on the transponder)
3 m
RF350R and RF350M:
IP67
System Manual, 02/2021, C79000-G8976-C345-09
Article number
6GT2398-1CF00
6GT2398-1CF10
SIMATIC RF300