Siemens SIMATIC RF300 System Manual page 227

6.5 ANT 12
6.5.1 Characteristics
The ANT 12 is primarily envisaged for tool identification applications. The very small size of the
antenna means that highly exact positioning is possible using the plastic nuts included in the
scope of delivery. The antenna cable can be plugged in.
ANT 12
6.5.2 Ordering data
Table 6-8
Antenna
ANT 12
(incl. one integrated antenna connecting cable 0.6 m)
ANT 12
(incl. one integrated, antenna connecting cable suitable for cable carri‐
ers 3 m)
SIMATIC RF300
System Manual, 02/2021, C79000-G8976-C345-09
Characteristics
Area of application
Read/write distance
Connecting cable
Connectable readers
Degree of protection
Ordering data ANT 12
Tool identification
Up to 16 mm (depending on the transponder)
3 m or 0.6 m
RF350R and RF350M:
IP67 (front)
Antennas
6.5 ANT 12
Article number
6GT2398-1CC10
6GT2398-1CC00
227