Siemens SIMATIC RF300 System Manual page 34

System overview
3.3 System configuration
Main applications
• Mechanical engineering, automation systems, conveyor systems
• Ancillary assembly lines in the automotive industry, component suppliers
• Small assembly lines
Note
Limitation of application
Note that the SIMATIC RF300 system is not a product line for access control or other security-
related authorization.
Application examples
• Production lines for engines, gearboxes, axles, etc.
• Assembly lines for ABS systems, airbags, brake systems, doors, cockpits, etc.
• Assembly lines for household electrical appliances, consumer electronics and electronic
communication equipment
• Assembly lines for PCs, small-power motors, contactors, switches
Advantages
• Reading and writing of large data volumes within a short time results in shorter production
cycle times and helps to boost productivity
• Can be used in harsh environments thanks to rugged components with high degree of
protection
• Simple system integration into TCP/IP networks, SIMATIC S7, PROFINET and PROFIBUS (TIA)
with little effort
• Shorter commissioning times and fewer plant failures and downtimes thanks to integral
diagnostic functionalities
• Cost savings thanks to maintenance-free components
3.3 System configuration
3.3.1 Overview
The SIMATIC RF300 system is characterized by a high level of standardization of its components.
This means that the system follows the TIA principle throughout: Totally Integrated Automation.
It provides maximum transparency at all levels with its reduced interface overhead. This ensures
optimum interaction between all system components.
34
System Manual, 02/2021, C79000-G8976-C345-09
SIMATIC RF300