Siemens SIMATIC RF300 System Manual page 396

ISO transponder
8.26 MDS D524
8.26 MDS D524
8.26.1 Characteristics
MDS D524
8.26.2 Ordering data
Table 8-69
MDS D524
Table 8-70
Spacer
8.26.3 Mounting on metal
Direct mounting of the transponder on metal is not permitted. A distance of ≥ 20 mm is
recommended to avoid a reduced read/write range and a reduction of the field data. This can be
accomplished, for example, by installing a spacer.
Note that if the distances (a and h) are not observed, this may result in a reduction of the field
data as well as a reduced write/read range.
396
Characteristics
Area of application
Memory size
Write/read range
Mounting on metal
ISO standard
Degree of protection
Ordering data for MDS D524
Ordering data of MDS D524 accessories
Production automation as well use in assembly and
manufacturing lines
8192 bytes of FRAM user memory
See section "Field data of ISO transponders (MDS D)
(Page 53)."
Yes, with spacer
ISO 15693
IP67/IPx9K
Article number
6GT2600-5AC00
Article number
6GT2690-0AK00
System Manual, 02/2021, C79000-G8976-C345-09
SIMATIC RF300