Siemens SIMATIC RF300 System Manual page 201

5.6.4 LED operating display
The operational statuses of the reader are displayed by the LEDs. The LED can adopt the colors
green, red or yellow and the statuses off , on
Table 5-30
5.6.5 Ensuring reliable data exchange
Note that the "center point" of the transponder must be in the area of the transmission window
to ensure secure data exchange. You can find additional information on this in the section
"Transmission window and read/write distance (Page 40)".
5.6.6 Mounting on metal
The RF382R can be mounted directly on metal. Flush mounting on metal is not permitted.
5.6.7 Minimum distance between several RF382R Scanmode readers
Figure 5-23
SIMATIC RF300
System Manual, 02/2021, C79000-G8976-C345-09
LED operating display on the reader
LED Meaning
The reader is turned off.
The reader is switched on and ready for operation.
There is a transponder in the antenna field.
There is an error. The number of flashes provides information about the current error. You
will find more information on error messages in the section "System diagnostics
(Page 425)".
Minimum distance between several RF382R Scanmode readers
5.6 SIMATIC RF382R with Scanmode - 1st generation
, flashing :
Readers
201