Network Configuration - Axia IQ Quick Start Installation Manual

NETWORK CONFIGURATION

1. Set a static IP address of 192.168.2.100 and subnet mask of
255.255.255.0 to the connected PC. The default address of
the QOR.32 will be 192.168.2.27. Note: If you wish to use a
different IP address or subnet mask for your iQ, proceed to
the next step below "Assigning a custom IP address to your
iQ", otherwise continue to Step 2 on the next panel.
ASSIGNING A CUSTOM IP ADDRESS TO YOUR IQ
(OPTIONAL STEP)
a. On the iQ Main Console simultaneously press and hold the
Meter (J) and Clock (K) Keys until the OLED Studio display (L)
shows the system options.
b. Turn the Studio Monitor control knob (M) to navigate the
options on the Studio display (L) below the knob. Turn knob
to Navigate to "IP Address". To change the default IP address,
press knob and enter the IP address. Each 8-bit position of
the IP address must be selected individually by turning the
knob until the desired number appears and pressing knob
to select. If Subnet Mask and Gateway options are required
for your network, turn the Studio Monitor control knob to
navigate to these options and enter values.
c. Once your required settings have been entered, turn the
Studio Monitor control knob (M) until "Save + Reboot" (N) is
displayed and press knob to enter.
d. Set a static IP address to the connected PC within the same
network as the iQ's new IP address.
e. Continue to Step 2.
J K
L
L
N
M
M
M