Options Setup; Software Options; Usb Flash Card Setup - GE Venue Fit Technical Publication

P R E L I M I N A R Y
DIRECTION 5854713-100, REVISION 2
Section 3-9

Options Setup

3-9-1

Software Options

Most of the options for Venue Fit™ are activated by installing a password (alphanumeric text string).
• For installation instructions, see:
3-9-2

USB Flash Card Setup

There is no special setup procedure for use of a USB Flash Card.
WHEN CONNECTING PERIPHERALS TO THE Venue Fit™ SYSTEM, UNLESS THE
WARNING WARNING
PERIPHERAL IS MEDICAL-GRADE EQUIPMENT IT SHOULD BE CONNECTED TO THE
ISOLATED USB CONNECTOR.
IMPORTANT During Stand-by mode, it is NOT recommended to introduce or remove USB
NOTICE
devices; this may cause the system to lock-up during the boot-up procedure.
DO NOT ATTEMPT TO USE A DIFFERENT TYPE OF WIRELESS NETWORK ADAPTOR.
WARNING WARNING
THE ULTRASOUND SYSTEM IS AN EXTREMELY SENSITIVE AND COMPLEX
MEDICAL SYSTEM. ANY UNAUTHORIZED PERIPHERALS MAY CAUSE SYSTEM
FAILURE OR DAMAGE!
3-52
Software Options Configuration
Chapter 3 - System Setup
VENUE FIT™ SERVICE MANUAL
.