Setting Procedure For Tag Function - Mitsubishi Electric MELSEC Q Series User Manual

6 FUNCTIONS
Makes communication
path setting on the
Access target CPU
setting.

6.3.2 Setting procedure for tag function

6 - 33
(2) Tag setting
(a) Set a tag in the tag setting of the Administrative menu. (Refer to Section
6.3.3)
(b) Up to 64 tags can be registered.
(c) Up to 64 components can be registered for each tag.
(d) Set the communication path to access the programmable controller CPU in
the access target CPU setting. (Refer to Section 4.6.7 for the access target
CPU setting.)
When setting the component, specify the communication path (CPU name)
set in the access target CPU setting.
Tag setting: No.1
Component setting: No.1
The setting procedure for using the tag function is given below.
Start
Create a network environment for Web server module
to access the Web server module from a personal
computer.
Make access target CPU setting on the Access target
CPU setting.
Set a tag on the Tag setting.
Monitor the set tag on the Tag data monitor.
Completed
Sets a tag on the Tag setting.
Refer to
Section 4. 6.
Refer to
Section 4. 6. 7.
Refer to
Section 6. 3. 3.
Refer to
Section 6. 2. 2.
MELSEC-Q
6 - 33