Dedicated Instruction; Dedicated Instruction List And Available Devices - Mitsubishi Electric MELSEC Q Series User Manual

8 DEDICATED INSTRUCTION

8 DEDICATED INSTRUCTION
The dedicated instructions are designed to facilitate programming for using the
functions of the intelligent function module.

8.1 Dedicated Instruction List and Available Devices

(1) Dedicated instruction list
Application Instruction
E-mail transmission WMSEND Sends e-mail.
FTPPUT
FTP
FTPGET
Tag TAG
LOG
LOGDEL
WFWRITE
Logging
WFREAD
WFDEL
When changing the data (control data, request data, etc.) specified in a dedicated
instruction, make sure that execution of the dedicated instruction has been
completed.
(2) Available devices
8 - 1
This chapter explains the following dedicated instructions.
Transfers (PUT) a file to the FTP server.
Transfers (GET) a file from the FTP server.
Issues a tag collection command. (Triggers a tag collection)
Issues a logging command. (Triggers a logging)
Deletes a saved file of logging data.
Writes the device data of the programmable controller CPU to the user
data file on the CompactFlash card.
Reads the user data file on the CompactFlash card to the device data of
the programmable controller CPU.
Deletes the user data file on the CompactFlash card.
POINT
The following devices are available for the dedicated instructions:
Internal devices
1
Bit
X, Y, M, L, F, V, B T, ST, C, D, W
1 Word device bit designation can be used as bit data.
Word device bit designation is done by designating Word device . Bit No. .
(Designation of bit numbers is done in hexadecimal.)
For example, bit 10 of D0 is designated as D0.A .
However, there can be no bit designation for timers (T), retentive timers (ST)
and counters (C).
Description
File register
Word
R, ZR
MELSEC-Q
Reference
section
Section 8.2
Section 8.3
Section 8.4
Section 8.5
Section 8.6
Section 8.7
Section 8.8
Section 8.9
Section 8.10
8
Constant
8 - 1