System Setting Status Area (Address: 70 To 86); Dial-Up Setting Status Area (Address: 90 To 134); Current Error Area (Address: 140 To 145) - Mitsubishi Electric MELSEC Q Series User Manual

3 SPECIFICATIONS

3.8.3 System setting status area (Address: 70 to 86)

3.8.4 Dial-up setting status area (Address: 90 to 134)

3.8.5 Current error area (Address: 140 to 145)

3 - 42
(h) Access point (Address: 67)
This area stores the access point of the Internet service provider as the
access point setting number on the "Dial-up setting" screen.
1 to 3: Access point setting number
(i) FTP port number (Address: 68)
(16) Number of disconnections from user screen (number of
disconnections by line disconnection part) (Address: 69)
This area stores the cumulative number of disconnections from the network in
response to a line disconnection request from the user screen.
The system setting status can be confirmed.
Refer to Section 4.6.3 for system setting.
(1) System setting status of Web server module(Address: 70 to 86)
For the storage example of the following data, refer to Section 3.8.2 (15).
(a) IP address (Address: 71 to 72)
(b) Subnet mask (Address: 73 to 74)
(c) Default gateway (Address: 75 to 76)
(d) DNS server address 1 (Address: 77 to 78)
(e) DNS server address 2 (Address: 79 to 80)
The dial-up setting status can be confirmed.
Refer to Section 4.6.4 for dial-up setting.
The latest error code that is currently occurring can be confirmed.
(1) Error code (Address: 140)
This area stores the error code that indicates the error status.
Refer to Section 9.3 for the error code.
(2) Time (Address: 142 to 145)
Stores the error occurrence time in BCD code.
b15
Address: 142 Month (01
143
Hour (00
144 Second (00
145 Year (00 to 99
H
to b8 b7
to 12 ) Year (00 to 99
H H H
to 23 ) Day (01
H H
to 59 ) Minute (00
H H
, first 2 digits) Day of the week (0
H
MELSEC-Q
to b0
, last 2 digits)
H
to 31 )
H H
to 59 )
H H
to 6 )
H H
3 - 42