Mitsubishi Electric MELSEC Q Series User Manual page 230

6 FUNCTIONS
Item
Tag name
Component name
Data type
Setting value
Set
Cancel
6 - 7
(a) Tag name
1) Set the tag data to perform tag data monitor.
2) Select the tag name set in the tag setting.
(Refer to Section 6.3.3 for the tag setting.)
3) The Tag name drop-down list displays the setting No. and tag names
of the tag setting.
(b) Monitor form
The monitor form is indicated below.
1)
1) Components set in the tag are displayed.
2) The values stored for the components are displayed.
 The values stored for the components are displayed in the display
form set in "Component setting" of the tag setting.
 "ERR****h" is displayed when an error has occurred in the collection
of the component. (**** indicates the error code.)
 "NO DATA" is displayed when no component has been collected.
(2) Tag component test
Executing the tag component test changes the current value of the tag data.
Only a user with the tag component write authority is allowed to conduct this test.
Refer to Section 4.6.5 for the user authority.
[Setting screen]
[Setting Item]
Displays the tag name to perform the tag component test.
Selects a component name to be tested.
Displays the data type of the selected component.
Sets the setting value.
Executes the tag component test.
Cancels the setting and returns to the Tag data monitor screen.
2)
Description
MELSEC-Q
6 - 7