Mitsubishi Electric MELSEC Q Series User Manual page 192

4 SET-UP AND PROCEDURE BEFORE OPERATION
4 - 68
File access stop request (Y2)
File access status (X2)
CompactFlash card setting status (X1)
(2) Canceling file access stop status
(a) Cancel the file access stop status.
1) Turn File access stop cancel request (Y3) from OFF to ON.
(b) Confirm that the file access stop status has been cancelled.
1) CompactFlash card setting status (X1) is ON.
2) File access status (X2) is OFF.
3) Turn File access stop cancel request (Y3) from ON to OFF.
File access stop request (Y3)
File access status (X2)
CompactFlash card setting status (X1)
(3) Setting CompactFlash card
(a) Open the LED cover, which is situated on the Web server module front, and
remove the CompactFlash card slot cover.
1) Put your finger at the bottom of the LED cover and lift the LED cover
open.
2) Put your finger at the top of the CompactFlash card slot cover and
then remove it.
(b) Insert the CompactFlash card.
When inserting the CompactFlash card into the Web server module, pay
attention to the orientation of the CompactFlash card.
Push the CompactFlash card securely into the slot until it is flush with the
EJECT button.
(Operating) (Stopped)
(Stopped)
1)
2)
MELSEC-Q
(Operating)
4 - 68