Mitsubishi Electric MELSEC Q Series User Manual page 563

APPENDICES
Item
5
TRIGGER
6
RESTORATION
7
EMAIL
8
DISCONNECT
9
BODY
10 APPEND
11
APPTAG
12
APPLOGGING
13
to EMAIL1 to EMAIL16
28
App - 59
Description
Trigger value
When "NEQUAL" or "EQUAL" is
selected at CONDITION
Restoration
value
When other than the above is
selected at CONDITION
Send an e-mail
Mark
when an event
Do not mark
occurs.
Disconnect from When "YES" is
the network selected at
EMAIL
after sending
mail
When "NO" is selected at EMAIL
When "YES" is selected at EMAIL 0 to 256 characters
E-mail main text
4
When "NO" is selected at EMAIL
When "YES" is
selected at
Attached file
EMAIL
When "NO" is selected at EMAIL
When "TAG" is selected at
APPEND
Tag setting No.
When other than the above is
selected at APPEND
When "LOGGING" is selected at
APPEND
Logging setting
No.
When other than the above is
selected at APPEND
When "YES" is
selected at
Destination 1 to
EMAIL
16 5
When "NO" is selected at EMAIL
1 Specify the tag setting No. set to the label of TAG.CSV.
An error will occur if the specified tag setting No. does not exist in TAG.CSV.
2 Specify the component setting No. set to the label of COMPONENT.CSV.
An error will occur if the specified component setting No. does not exist in
COMPONENT.CSV.
3 An error will occur if the data type of the specified component setting No. is "String".
4 Refer to Appendix 6.2 (2) for the precautions for editing the e-mail main text.
5 Specify the e-mail address (To:) setting No. set to the label of EMAIL.CSV.
An error will occur if the specified e-mail address (To:) setting No. does not exist in
EMAIL.CSV.
Numerical value (integer,
real number)
(Blank)
Numerical value (integer,
real number)
Mark
Do not mark
(Blank)
(Blank)
None
Tag data
Logging Data
(Blank)
1 to 64
(Blank)
1 to 64
(Blank)
Mark
Do not mark
(Blank)
: Must be set
MELSEC-Q
Setting
Set value
requirement
YES
NO
YES
NO
NONE
TAG
LOGGING
YES
NO
: Need not be set (Invalid)
App - 59