Appendix 2 Accessible Devices And Ranges - Mitsubishi Electric MELSEC Q Series User Manual

APPENDICES

Appendix 2 Accessible Devices and Ranges

QCPU
(Q mode)
RCPU( 2) ( 3)
LCPU
QnACPU
QCPU (A mode)
ACPU
C Controller module ( 2) ( 3)
A
App - 2
This section provides information on the accessible devices and accessible ranges.
(1) Accessible CPU module
PLC series( 7)
Basic model QCPU Q00JCPU, Q00CPU, Q01CPU
High Performance
Q02CPU, Q02HCPU, Q06HCPU, Q12HCPU, Q25HCPU
model QCPU
Process CPU Q02PHCPU ( 2), Q06PHCPU ( 2), Q12PHCPU, Q25PHCPU
Redundant CPU ( 1)
Q12PRHCPU, Q25PRHCPU
( 2)
Q00UJCPU, Q00UCPU, Q01UCPU, Q02UCPU, Q03UDCPU,
Q04UDHCPU, Q06UDHCPU, Q10UDHCPU, Q13UDHCPU,
Universal model Q20UDHCPU, Q26UDHCPU, Q03UDECPU, Q04UDEHCPU,
QCPU( 2) ( 3) Q06UDEHCPU, Q10UDEHCPU, Q13UDEHCPU, Q20UDEHCPU,
Q26UDEHCPU, Q50UDEHCPU, Q100UDEHCPU, Q03UDVCPU,
Q04UDVCPU, Q06UDVCPU, Q13UDVCPU, Q26UDVCPU
R04CPU, R08CPU, R16CPU, R32CPU, R120CPU
L02CPU ( 4), L26CPU-BT( 4), L02CPU-P( 4), L26CPU-PBT( 4),
L02SCPU( 5), L02SCPU-P( 6), L06CPU( 6), L06CPU-P( 6),
L26CPU( 5), L26CPU-P( 6)
Q2ACPU, Q2ACPU-S1, Q2ASCPU, Q2ASCPU-S1, Q2ASHCPU,
Q2ASHCPU-S1, Q3ACPU, Q4ACPU, Q4ARCPU
Q02CPU-A, Q02HCPU-A, Q06HCPU-A
A1NCPU, A0J2HCPU, A1SCPU, A1SHCPU, A1SJCPU, A1SJHCPU,
A2CCPU, A2CJCPU, A2NCPU, A2NCPU-S1, A2SCPU, A2SHCPU,
A2ACPU, A2ACPU-S1, A2UCPU, A2UCPU-S1, A2USCPU,
A2USCPU-S1, A2USHCPU-S1, A3NCPU, A3ACPU, A3UCPU,
A4UCPU
Q12DCCPU-V, Q24DHCCPU-V, Q24DHCCPU-LS
1 Access to redundant CPUs on other stations is not allowed.
2 There are restrictions on the serial number of the Web server module used. The
restrictions on the serial number are the same as those of applicable systems. (Refer
to Section 2.1.)
3 When GX RemoteService-I or MX MESInterface-WS Version 1 is used, the Universal
model QCPU, RCPU and C Controller module cannot be accessed.
4 Use the Web server module whose serial No. (first five digits) is 14022 or later.
5 Use the Web server module whose serial No. (first five digits) is 14122 or later.
6 Use the Web server module whose serial No. (first five digits) is 15052 or later.
7 Do not access the PLC series other than the above table. If the CPU module is
accessed by mistake, all access target CPU may not be accessed.
MELSEC-Q
Model
App - 2